Wednesday, June 28, 2017

PT-1900 system board






I got a Brother PT-1900 that had a leaky battery so I opened it up to clean it and see what was inside.

Looks like a

Hitachi (Renesas) H8S / 2312 cpu with 8k of ram

Oki R27V802F-04HMA 524,288-Word x 16-Bit or 1,048,576-Word x 8-bit One Time PROM

PTC PT6520 lcd controller

Stanley EM100 1000 day rollover

So the Stanley finally rolled over from 999 to 1000 days and the moment of truth...



it goes back to zero and starts showing you tenths of a day, so after a couple of hours it goes from 0.0 to 0.1 days.

Monday, June 26, 2017

A couple of neat features on my car

A couple of things I've discovered about my car: you can roll up/roll down the windows with the key out of the ignition. So if you stop the car and take the key out, as long as you don't open any of the car doors, the power windows are still active. Once you open any door, the power windows shut down.

If you leave a door open, the overhead light will shut off after about 10 minutes. That helps keep the battery from running down.


And it won't let you lock your keys inside. If you hit the door lock button with the door open, it will immediately unlock all the doors if the keys are in the ignition.

Sunday, June 25, 2017

Compute! Heat Seeker for apple 2

Years ago, I typed in a program from Compute Magazine's Apple Applications Special called Heat Seeker.

I've looked for pdf scans of that particular issue and haven't been able to find it.

I found it on a disk at asimov under images/magazines/compute/.


At last. (I think the memory of the game is better than the game is). It's a bit twitchy. If it were a bit slower and easier to control I think it'd be a lot more fun. Heck, just destroying the missiles on the ground with no missiles taking off is a challenge.





Compute! Apple Applications Spring-Summer 1985 (Side 1 - DOS 3.3).DSK

What happens past 999 days with Stanley EM100?



So I'm wondering what's going to happen once the day counter goes over 999 days... will it roll over to zero? will it just display 999?

Stay tuned, let's see what happens...

After 995 days, the Daewoo fridge is not too far off what the Energy Guide says, maybe 20% higher at $59.13. I think if the seals were a bit better it'd be more efficient. As the plastic door seals have shrunk over time, they don't remain perfectly straight.




Friday, June 9, 2017

INFO mode on PT-2600

So I got a PT-2600 and was fiddling about with INFO mode.

First hold down CODE+R while hitting power and that should reset the unit.
Turn it off, then hold down CODE+K while hitting Power and you should get into INFO mode.

So if you hit 0 you get into a mode where it says "KEY CODE". I couldn't figure out what this was all about, it wants some key number, but after typing 2600 (for the PT-2600, get it?) it then shows me the current serial number(which matches the number on the back of the unit) and allows me to set the serial number. I think that this must be where it will set the serial number for when you hook it up to a USB port.

I've successfully entered a new serial number, then Enter and it says OK. Power off, code+k + power and 0 then 2600 and I can see my new serial number.

(on my PT-1950, I tried 1950 for the KEY CODE and it worked to bring up the serial number)


Also there's an adjustment setting (though I have no idea what I'm adjusting)

If you hit H it will say "Adjust +- 0mm"

If you hit left arrow 4 this will change to "Adjust - 2.0mm"

If you hit right arrow 9 this will change to "Adjust + 4.5mm"

and if you hit 0 this will change to "Adjust +- 0mm"


So you can adjust "something" from -2.0 to +4.5mm in half mm increments.





Wednesday, June 7, 2017

HP Elite 8100 SFF and ubuntu 16.04 sound

I've got this HP Elite 8100 SFF (circa 2011) and everything seems to work, but no sound.

In System settings/Sound I get a "Dummy Output."

dmesg | grep snd

tells me that

[ 11.737424] snd_hda_intel 0000:00:1b.0: no codecs found!

Man, I wish things would just work...


!!DMI Information
!!---------------

Manufacturer: Hewlett-Packard
Product Name: HP Compaq 8100 Elite SFF PC
Product Version:
Firmware Version: 786H1 v01.05
Board Vendor: Hewlett-Packard
Board Name: 304Ah



!!Soundcards recognised by ALSA
!!-----------------------------

--- no soundcards ---


!!PCI Soundcards installed in the system
!!--------------------------------------

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev
05)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------

00:1b.0 0403: 8086:3b56 (rev 05)
Subsystem: 103c:304a


edit: I get the same exact thing with Knoppix 7.7, snd_hda_intel 0000:00:1b.0: no codecs found!

I got a usb docking port that has usb sound built-in and that seems to work just fine so far, just plug in and it works.

edit: I updated the bios from 1.05 to 1.13 and it didn't make any difference. Still no sound.